A Study of Neogene Sedimentary Outcrops of the Greater Miri Area - Can Clay Gouging Be Calibrated in Outcrops and Shallow Subsurface Boreholes?
DOI:
https://doi.org/10.51835/bsed.2017.39.1.86Abstract
The greater Miri area offers particularly well-exposed world-class examples of fault geometry and clay gouging. Such information offers good material for studying fault architecture and clay smear morphology, and help to understand fault seal mechanisms in the subsurface. Recent studies on fault and clay gouging in the Neogene sedimentary rocks of greater Miri area show a variety of fault geometries of both abrasive-type and shear-type. In a Nippon Oil-sponsored study carried out in Curtin University, fifteen (15) core holes were drilled through clay-gouged fault planes at three outcrop locations. Cores of the formation were taken, and the drilled holes were then pressurized by water injection for packer testing. The performed leak-off test results were somewhat surprising - weathered Neogene sediments of the Miri and Tukau formations offered little or no pressure retention in fault zones and host rock alike, and leak-off fracturing occurs already at 1.25 bar. The rock mechanics of weathered rock might be very different from fresh rock, and may offer little or no insight into those of virgin rocks. Therefore, weathered rock properties may not be suitable for subsurface fault seal simulation studies.Downloads
Published
How to Cite
Issue
Section
License
Licensing and Copyright Agreement
In submitting the manuscript to BERITA SEDIMENTOLOGI, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere.
- That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Copyright
Authors who publish with BERITA SEDIMENTOLOGI agree to the following terms:
- Authors retain copyright and grant BERITA SEDIMENTOLOGI the right of first publication with the work simultaneously licensed under a Creative Common Attribution License (https://creativecommons.org/licenses/by-sa/4.0/) that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g. post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g. in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Non-Exclusive Commercial License
Forum Sedimentologiwan Indonesia (FOSI) and Ikatan Ahli Geologi Indonesia (IAGI), as the publishers of BERITA SEDIMENTOLOGI, occasionally will compile previously published volumes, reproduce them and put the copies into a media (e.g. DVD or USB drive) that later can be sold in exchange for a small amount of fees. The fees are not meant to gain profit from this journal publication, however they are to cover the production cost only.
By publishing with BERITA SEDIMENTOLOGI, the Authors agree to grant this journal and its publisher a Non-Exclusive Commercial License to compile, reproduce and sell the publication copies in a DVD or USB drive media and will not claim any rights/shares from the generated income in the future.






